Kenwood TS 850/DSP-100 Problem
Posted: Wed Sep 19, 2012 10:15 am
Hi, I have RFI problem and I believe that it comes from the DSP-100 and not from the TS-850. When
I turn on the amplifier which is a Kenwood TL 922A there is where my problem starts getting a high
Distortion due to high RFI, if I keep my amp on but I reduce the power on the transceiver to let’s say 40 watts then there is no problem, this problem is in 40 meters, but not on other bands, I’ve checked the
SWR on the antenna and it’s at 1.2 so there is no problem with the antenna I’ve used ferrite clamps
On the Cables, I have a good ground to the Radio and Amp.
Any tips ?
Thanks
I turn on the amplifier which is a Kenwood TL 922A there is where my problem starts getting a high
Distortion due to high RFI, if I keep my amp on but I reduce the power on the transceiver to let’s say 40 watts then there is no problem, this problem is in 40 meters, but not on other bands, I’ve checked the
SWR on the antenna and it’s at 1.2 so there is no problem with the antenna I’ve used ferrite clamps
On the Cables, I have a good ground to the Radio and Amp.
Any tips ?
Thanks