Damn.. You guys are evil...

Hookin up those Audio Boxes without gettin yourself Perplexed.
Post Reply
User avatar
Bow
Voodoo Audiophile
Posts: 77
Joined: Mon Jan 29, 2007 10:30 am
Location: Yuma, AZ

Damn.. You guys are evil...

Post by Bow »

So I've been talking with W5UDX on the air on 10 meters, and he has been helping my tweak the Audio out of my Modified IC-718...

We noticed I had some RF crackle and "muffled" type of sound in my audio...

Today, I ordered me some I.C.E. for the Coax.... Model 303U

Then I was talking with him about my next Rack piece I should purchase...
You Know after the:
MXL V57 Condenser
Behringer VX-2000 Microphone Preamplifier/Voice Processor
Behringer PEQ-2200 Parametric EQ
Alesis Nano-Compressor
Rolls DB25 Match Box
Behringer MX-602A Mixer

...of course he says... Behringer EX3200 Ultrafex Pro

I just scored a brand new one on ebay for $65....

I guess there will be another Voodoo EX-3200 on the air soon....

8)
Bow


Quite possibilly the only 3.3 Khz wide Icom IC-718 in the world...
Top
User avatar
SMC Productions
VooDoo Audio Guru
Posts: 51
Joined: Wed Mar 21, 2007 4:19 pm
Location: SabbathTown TN
Contact:
Contact SMC Productions

Re: Damn.. You guys are evil...

Post by SMC Productions »

Bow wrote:
Then I was talking with him about my next Rack piece I should purchase...
You Know after the:
Be VERY careful....that's the way I started out! :D
Calcitra Clunis
Image
Top
User avatar
Bow
Voodoo Audiophile
Posts: 77
Joined: Mon Jan 29, 2007 10:30 am
Location: Yuma, AZ

Re: Damn.. You guys are evil...

Post by Bow »

SMC Productions wrote:
Bow wrote:
Then I was talking with him about my next Rack piece I should purchase...
You Know after the:
Be VERY careful....that's the way I started out! :D
HAHAHHA.. But I'll tell you what, I'm real tempted to build a tube mic preamp...

like a Altec 1566A...

The Bellari "BLING" stuff is a bit outta my price range fo rme to justify on a 3.3kHz wide Ic-718
LOL

But $75 for the EX3200...
That's doable!
Bow


Quite possibilly the only 3.3 Khz wide Icom IC-718 in the world...
Top
User avatar
SMC Productions
VooDoo Audio Guru
Posts: 51
Joined: Wed Mar 21, 2007 4:19 pm
Location: SabbathTown TN
Contact:
Contact SMC Productions

Re: Damn.. You guys are evil...

Post by SMC Productions »

Bow wrote: HAHAHHA.. But I'll tell you what, I'm real tempted to build a tube mic preamp...

like a Altec 1566A...
I think you should....it looks fairly simple...if you have the time...and while you are at it...build two...as I would like one to add to my Pre Collection!

Image

But $75 for the EX3200...
That's doable!
Yeah...it is....I've had that unit for several years...and never really used it for much of anything...but it works great for this Voodoo stuff! :D
Calcitra Clunis
Image
Top
User avatar
SMC Productions
VooDoo Audio Guru
Posts: 51
Joined: Wed Mar 21, 2007 4:19 pm
Location: SabbathTown TN
Contact:
Contact SMC Productions

Post by SMC Productions »

These looks like really nice kits!

http://hamptone.com/index.html

Image
Calcitra Clunis
Image
Top
User avatar
Bow
Voodoo Audiophile
Posts: 77
Joined: Mon Jan 29, 2007 10:30 am
Location: Yuma, AZ

Post by Bow »

Hey Scott...

You are of the "recording" type, Correct?

This is the last tube thing I built:

Image

4 gain stage pre-amp, 6V6 power section running with 485VDC on the Plates...

It doesn't do "Clean" at all.... :twisted:
Bow


Quite possibilly the only 3.3 Khz wide Icom IC-718 in the world...
Top
User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 722
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

Now thats some Plate Voltage!!!!

oh....
and the Evil has just begun!

MOOO HOOHAA Haaa haaa ha ha ha!!!!! :twisted:
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm
Top
User avatar
Bow
Voodoo Audiophile
Posts: 77
Joined: Mon Jan 29, 2007 10:30 am
Location: Yuma, AZ

Post by Bow »

So I guess the real question is...

Where does the Behringer EX3200 Ultrafex Pro go in the pile?

I am currently hooked up in this order:

MXL V57 Condenser
Behringer VX-2000 Microphone Preamplifier/Voice Processor
Ch.1 Behringer MX-602A Mixer

Effects Loop Send Behringer MX-602A Mixer
Behringer PEQ-2200 Parametric EQ
Alesis Nano-Compressor
Effects Loop Return Behringer MX-602A Mixer

Behringer MX-602A Mixer Mains Out
Rolls DB25 Match Box

3.3kHz Voodoo IC-718

Where will the VOODOO EX3200 fit in the stack?

Should I dump using the Effects loop on the Mixer and just go to the Mixer last?
:?:

Wait... It helps to RTFS (Read The FooKING Site)...

According to http://www.wz5q.net/index/rack_data/3200.htm

I should hook it up like This:

XL V57 Condenser
Behringer VX-2000 Microphone Preamplifier/Voice Processor
Ch.1 Behringer MX-602A Mixer

Effects Loop Send Behringer MX-602A Mixer
Behringer PEQ-2200 Parametric EQ
Behringer EX3200 Ultrafex Pro
Alesis Nano-Compressor
Effects Loop Return Behringer MX-602A Mixer

Behringer MX-602A Mixer Mains Out
Rolls DB25 Match Box

3.3kHz Voodoo Modded IC-718

So now, the only Real question is...

Should I dump using the Effects loop on the Mixer and just go to the Mixer last :?:
Bow


Quite possibilly the only 3.3 Khz wide Icom IC-718 in the world...
Top
User avatar
SMC Productions
VooDoo Audio Guru
Posts: 51
Joined: Wed Mar 21, 2007 4:19 pm
Location: SabbathTown TN
Contact:
Contact SMC Productions

Post by SMC Productions »

Bow wrote:Hey Scott...

You are of the "recording" type, Correct?

This is the last tube thing I built:



4 gain stage pre-amp, 6V6 power section running with 485VDC on the Plates...

It doesn't do "Clean" at all.... :twisted:
I bet it doesn't, with the 4 gain pre. It looks simply AWESOME! I would LOVE to try it out in the studio!

I've got a Laney, Tony Iommi Signature Amp, that has 5 gain pre stages, and it rocks...it's Bloody Loud, and has tone that doesn't quit! I call it the 'sound of God'! 8)

Image

http://www.guitarplaza.com/langh100tito.html
Calcitra Clunis
Image
Top
User avatar
Bow
Voodoo Audiophile
Posts: 77
Joined: Mon Jan 29, 2007 10:30 am
Location: Yuma, AZ

Post by Bow »

Nice!

You have a good (read "cheap") source for transformers for Mic Preamps?

I found a design that looks dead simple and has been getting great reviews for it's ability to cancel power supply noise...

Image

But I will probably run some JAN 6072's that I have...
Bow


Quite possibilly the only 3.3 Khz wide Icom IC-718 in the world...
Top
User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 722
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

We smell some......


GEARSLUTZ!!!!!!!!
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm
Top
User avatar
Bow
Voodoo Audiophile
Posts: 77
Joined: Mon Jan 29, 2007 10:30 am
Location: Yuma, AZ

Post by Bow »

wz5q wrote:We smell some......


GEARSLUTZ!!!!!!!!
I'm sure you wouldn't know anything about that... now would ya? :wink:

Image

You must be the Pimp of the of the GearSluts...
Bow


Quite possibilly the only 3.3 Khz wide Icom IC-718 in the world...
Top
!KANT
Voodoo Audio Crew Moderator
Posts: 404
Joined: Wed Mar 09, 2005 10:22 pm
Contact:
Contact !KANT

Post by !KANT »

OMG....you three are just determined to make me insane!!!! :twisted:
Top
!KANT
Voodoo Audio Crew Moderator
Posts: 404
Joined: Wed Mar 09, 2005 10:22 pm
Contact:
Contact !KANT

Post by !KANT »

OMG....you three are just determined to make me insane!!!! :twisted:
Top
User avatar
SMC Productions
VooDoo Audio Guru
Posts: 51
Joined: Wed Mar 21, 2007 4:19 pm
Location: SabbathTown TN
Contact:
Contact SMC Productions

Post by SMC Productions »

wz5q wrote:We smell some......


GEARSLUTZ!!!!!!!!
Yummmy....the smell of GearSlutz, in the morning....... :twisted:
Calcitra Clunis
Image
Top
User avatar
Bow
Voodoo Audiophile
Posts: 77
Joined: Mon Jan 29, 2007 10:30 am
Location: Yuma, AZ

Post by Bow »

I gots the Voodoo 3200.... today, teh little brown truck dropped it at my door...

Tommorrow, I rewire the rack with mnew wire and a new audio chain layout

That's right...

I am one step further from the dreaded DXer tone....
Bow


Quite possibilly the only 3.3 Khz wide Icom IC-718 in the world...
Top
User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 722
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

I'm sure you wouldn't know anything about that... now would ya?
Well actually, We're just some Newbie Rookies compared to some....

Aighnt that right Scot!
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm
Top
User avatar
SMC Productions
VooDoo Audio Guru
Posts: 51
Joined: Wed Mar 21, 2007 4:19 pm
Location: SabbathTown TN
Contact:
Contact SMC Productions

Post by SMC Productions »

wz5q wrote:
I'm sure you wouldn't know anything about that... now would ya?
Well actually, We're just some Newbie Rookies compared to some....

Aighnt that right Scot!
I refuse to answer....on the grounds that it may incriminate me! :roll:
Calcitra Clunis
Image
Top
User avatar
Voodoo Guru
VooDoo Site Admin
Posts: 722
Joined: Wed Feb 23, 2005 8:47 am
Location: Down there on the right...

Post by Voodoo Guru »

I gots the Voodoo 3200.... today, teh little brown truck dropped it at my door...

Tommorrow, I rewire the rack with mnew wire and a new audio chain layout
Can't wait fer the Results!!!!
Voodoo Guru
From Deep in the IDD of the Sub-Harmonix Realm
Top
User avatar
Bow
Voodoo Audiophile
Posts: 77
Joined: Mon Jan 29, 2007 10:30 am
Location: Yuma, AZ

Post by Bow »

BAM Baby!

I do believe I got the first Icom IC-718 with VOODOO in the rack!

It makes me feel a little Funky...

And has been approved on the air by W5UDX....


:snakeman:
Bow


Quite possibilly the only 3.3 Khz wide Icom IC-718 in the world...
Top
Post Reply

Return to “The Audion Connection”