ICOM 756 Pro + Behringer audio

[YO2BTW]

I recently joined the eSSB / Hi-Fi SSB.

Now I am in the stage of experiment and wire the gear.
I have the following configuration:

TRX ICOM 756 Pro

Feedback Destroyer PRO DSP 1124P
AUTOCOM Pro XL MDX 1600
Virtualizer PRO DSP 2024P

Mike Behringer B1 + pop killer filter
Mixer Behringer Xenyx 802

iBox ( home made )


What do you recommend for interconnection, for the gear connection’s order and mainly how to do it, setup etc... ?
Do you have other recommandations from Behringer ?

Thanks !

[Voodoo Guru]

Howdy Adrian,
Welcome to the Forum!!!
Glad to have you here.

If you look back in the threads, you will find most of your answers as to the setup and order of the rack equipment.

The best way to start in the order would be like this:

Mike Behringer B1 + pop killer filter
Mixer Behringer Xenyx 802 as the mic preamp
Feedback Destroyer PRO DSP 1124P
AUTOCOM Pro XL MDX 1600
Virtualizer PRO DSP 2024P
iBox
ICOM 756 Pro

Good Luck and have fun!!

[YO3IBW]

Howdy indeed!
How about that, except the DSP2024 you've got the-same audio gear like me.
Try to wire them like this:

B1 Mike
Xenyx 802 Mixer - Preamp
Ch1 MDX1600 - Noise Gate/Small compression.
Ch1 DSP1124p - EQ
Ch2 MDX1600 - Compressor, Dynamic Enhancer, Peak Limiter
Ch1 DSP2024p - Echoooo Echoooo. Effects Processor for the 80m band. )
Ibox
Icom tcvr.

To have an one box buttons control panel I use the FX Send / Aux Return function on the mixer for the MDX1600 and DSP1124p. In the-same chain you can install also the DSP2024p to have all the processing gear on the FX Send/Aux Return loop.
Hope I'll hear ya sometimes on the bands. For the moment my 80m band antenna really sux.
Cheers!